The main types of curling irons
Curling irons (also called curling tongs) differ in three ways: the shape of the barrel, its diameter and the handle [2]. Get those three right and you can make almost any curl. The TotalBeauty chart above pairs six curl styles with the tool for each, from tight spirals at the top to soft waves at the bottom [1].
Clamp curling iron
The classic curling iron is a straight cylinder with a clamp that holds the end of the hair while you wind it. Most clamp irons have a spring-loaded handle, the most popular type, which opens and closes the clamp for you [2]. They are the easiest tool to learn on and give uniform curls from root to end.
Marcel curling iron
A marcel iron has no spring: you open and close the clamp yourself by squeezing the handles, [2], which gives you more control over how firmly the hair is held. TotalBeauty’s pick for tight, Shirley Temple spirals is a small-barrel marcel iron [1]. Heated irons like this go back to the 1870s, when the French hairdresser Marcel Grateau introduced heated metal styling tools [2].
Curling wand
A wand has no clamp at all. You wrap the hair around the rod and hold the end, which is why most wands come with a heat-resistant glove [2]. Wands give a less uniform, more natural curl. A conical wand tapers from a wide base to a narrow tip, so the curl is tighter where the barrel is thinner [3]; TotalBeauty uses one for springy tendrils [1]. Reverse cone wands taper the other way [2].
Double and triple barrel irons
Multi-barrel irons press the hair between two or three parallel barrels to make an S-shaped wave all along the section [2]. TotalBeauty recommends a three-barrel iron for what it calls “not-so-’80s crimped hair”, a looser, more modern alternative to the zigzag crimping irons that were popular in the 1980s and 1990s [1][2].
Flat iron and hot rollers
Neither is a curling iron, but both curl hair. A flat iron is mainly a straightener [2], yet twisting it as you glide it down a section gives soft, cascading body waves. Hot rollers heat-set the hair while you get ready and give the loosest, most natural-looking wave of all [1].
Curling iron barrel sizes and the curls they make
Barrel diameters range from about half an inch (1.3 cm) to 2 inches (5.1 cm). The rule is simple: smaller barrels make tighter spirals and ringlets, larger barrels make looser curls and volume [2]. The TotalBeauty chart follows the same pattern, with a small barrel for tight spirals and a medium barrel for voluminous, loose curls [1]. As a rough guide, based on Bio Ionic’s size chart [3]:
| Barrel size | Curl you get | Works best for |
|---|---|---|
| 0.5 to 0.75 in | Tight ringlets and spirals | Short hair, or adding texture to fine hair |
| 1 in | Classic, defined curls | Most hair lengths; the all-rounder |
| 1.25 in | Looser curls and beach waves | Medium to long hair |
| 1.5 to 2 in | Soft bends and volume | Long or layered hair, blow-dry style finishes |
Hair length matters as much as the barrel. Long hair wraps round the barrel several times, so it can use a bigger barrel and still get a full curl, while short hair may only wrap once and needs a slimmer barrel for the curl to show [3].
Which curling iron should you buy?
If you only want one tool, a 1-inch or 1.25-inch clamp iron is the most versatile. It gives classic curls on shoulder-length hair and looser waves on longer hair, and the clamp makes it easy to use. Add a conical wand if you want a more undone, natural look, or a three-barrel waver for mermaid-style waves.
Barrels are made of ceramic, metal, Teflon, titanium or tourmaline [2]. Whatever the material, look for an adjustable temperature, so you can keep the heat as low as your hair allows.
How to curl your hair without damaging it
Heat breaks the hydrogen bonds that hold hair in its natural shape, which is why curls form, but repeated high heat damages hair [2]. The American Academy of Dermatology recommends using hot tools on dry hair, keeping flat irons on a low or medium setting and using them no more often than every other day, and leaving a curling iron in place for only a second or two [4].
- Let hair dry fully before curling; never use an iron on damp hair.
- Use a heat protectant spray and start at a low setting.
- Work in small sections so each one curls in a single pass.
- Let curls cool before brushing or touching them so they set and last longer.
Questions about types of curling irons
What are the different types of curling irons?
Spring-clamp irons, marcel irons, clipless wands (straight, conical or reverse cone), and double or triple barrel wavers. They also come in barrel sizes from about half an inch to 2 inches [2].
What is the difference between a curling iron and a curling wand?
A curling iron has a clamp that holds the hair; a wand has no clamp and you wrap the hair around it by hand [2]. Wands tend to give a looser, more natural curl.
What size curling iron is best for loose curls?
A 1.25-inch to 1.5-inch barrel for medium to long hair. For tight curls use 0.75 inch or smaller [3].
What is a marcel curling iron?
A curling iron with no spring, where you work the clamp by pressing the handles yourself [2]. A small-barrel marcel iron is TotalBeauty’s choice for tight spirals [1].
How do you get beach waves?
Use a 1.25-inch barrel or a flat iron, leave the ends out of the curl, and brush or shake the curls out once cool [1][3].
Sources
- TotalBeauty, Hayley Mason, The curling tools you need to get every type of curl, the original infographic.
- Wikipedia, Hair iron.
- Bio Ionic, Curling Iron Sizes: When a Quarter of an Inch Goes a Long Way, 31 July 2025.
- American Academy of Dermatology, Hair styling without damage.
Last reviewed 2 November 2026

